User account details
Name/Username*:
 
Password*:
Confirm Password*:
 
Company*:
Position/Company Activity:
Country*:
Address:
Phone*:
Fax:
E-mail*:
WEB:

Poll
1.ОБОРУДВАНЕ ЗА БЕЗРАЗРУШИТЕЛЕН КОНТРОЛ:

2.ОБОРУДВАНЕ ЗА ИЗПИТВАНЕ, ИЗМЕРВАНЕ И КОНТРОЛ:

Enter the text in the picture :
Click here to change the image

BulgarianEnglish
NDT Equipment and Accesories
Measuring and Testing Instruments


Special Transducers

RTD Transducers

RTD transducers are well known in the nuclear industry for inspection of critical weld areas in pipes and pressure vessels. We are the exclusive North American representative for this special line of transducers manufactured by RTD in the Netherlands. The realm of applications for these transducers is extensive: inspection of coarse grain austenitic steel, location of undercladding cracks, detection and sizing of IGSCC, automated scanning of pipe and pressure vessels, and continuous high temperature applications.

Low Frequency Narrowband Transducers

Meant for use in pairs for through transmission in materials such as concrete, wood, and geological samples, these are available in frequencies of 50 kHz (X1021), 100 kHz (X1020), and 180 kHz (X1019). Recommended instruments are high voltage pulser-receivers such as the Model 5058PR or 5077PR Square Wave Pulser.

 

 

Combination Longitudinal/Shear Mode Transducers

These transducers generate simultaneous longitudinal waves and shear waves in either single element, dual element, or three element arrangement. They can be custom designed for different frequencies and element sizes.

 

 

Variable Angle Beam Wedge

The Variable Angle Beam Wedge allows the user to adjust the incident angle from 0° to 50° to create refracted angles in steel from 0° to 90°. The wedge is to be used with the 0.50 x 1.00 in. Standard Angle Beam Transducers. Wedge Part Number = ABWX-2001

 

 

 

500 kHz Broadband/Highly Damped Transducers

This highly damped transducer measures the thickness of fiberglass, composites, and other attenuating materials. This transducer can also be used with a NWC-302 Nylon Wear Cap for flaw detection on thick or rough surfaced casting materials. Part number is M2008, (1.5 in., 38 mm diameter).

Continuous High Temperature Delay Line Transducer

This transducer can continuously withstand temperatures as high as 350 °F (175 °C) and pressures up to 85 PSIG. One typical application is to monitor the cure of materials in autoclave.
Part number is X2002, (2.25 MHz, 0.5 inch, 13 mm diameter).