| Hardness parameter | HL, HRC, HRB, HV, HB, HS |
| Measuring range / metallic materials | See table above |
| Tensile strength U.T.S. range (steel only) | sb from 374 to 2652 |
| Accuracy | Within ±6HLD |
| Functions | Auto-recognition of connected probe and probe test |
| | direction, auto-conversion to other hardness scales |
| Memory | 1000 test maximum |
| Data-output | RS-232 to hyperterminal (MS) and dataview TH-160 |
| Printer | Thermal printer showing all test results, |
| | settings and histogram |
| Statistics | Average value, min-max, upper-lower limits |
| Impact device | D (standard) |
| Optional impact devices | DC/D+15/DL/G/C/E (see next page) |
| Workpiece max. hardness value | 900HLD |
| Workpiece radius (convex/concave) | Rmin = 50mm (with support ring Rmin= 10mm) |
| Min. Workpiece weight | 2~5kg on stable support |
| | 0.05~2kg with compact coupling |
| Workpiece min. thickness coupled | 5mm (except with impact device G: 10mm, C: 1mm) |
| Workpiece min. case hardened depth | 0.8mm |
| Indentation depth | See next page: Impact devices data |
| Power | Rechargeable Li battery, 6V (1 pc) |
| Charger | 6V, 500mA (1.8VA) |
| Charging time | 2.5 - 4 hours |
| Operating temperature | 0 to 40 °C |
| Overall dimensions | 230mm x 90mm x 47mm |
| Weight | 420 gr (including impact device and printer) |
